Type Of Memory Description
DRAM (Dynamic RAM) Memory that must be refreshed.
SRAM (Static RAM) Does not require refresh. Used for cache memory.
SDRAM (Synchronous Dynamic RAM) Synced with the CPU clock.
DDR (Double Data Rate) SDRAM Data read on rising and falling edge of computer clock to double the bandwidth of SDRAM. 184-pin, 64-bit DIMM.
DDR2 Similar to DDR but 240-pin, 64-bit DIMM. Faster than DDR.
Single Ranked DDR Uses one DDR module in a single slot.
Double Ranked DDR Uses two DDR modules in two slots to double bandwidth to the system bus.
Form Factor Description
DIMM (Dual Inline Memory Module) 1689, 184, or 240-pins. Pins on both sides are independent. SDRAM uses DIMM. 64-bits.
SoDIMM (Small outline DIMM) Used in notebook computers. 72-pin is 32- bits and 144-pins is 64-bits
MicroDIMM Smaller than a SoDIMM, used in sub-notebook computers. 144-oins SDRAM and 172-pin DDR
RIMM (Rambus Inline Memory Module) 184 or 168-pin, 16 or 32bit, 800-1600 MHz, 2 notches. Each RIMM slot must be filled. C-RIMM can empty slots. Uses heat spreader. Current DDR and DDR2 is faster and less expensive.
DRAM (Dynamic RAM) Memory that must be refreshed.
SRAM (Static RAM) Does not require refresh. Used for cache memory.
SDRAM (Synchronous Dynamic RAM) Synced with the CPU clock.
DDR (Double Data Rate) SDRAM Data read on rising and falling edge of computer clock to double the bandwidth of SDRAM. 184-pin, 64-bit DIMM.
DDR2 Similar to DDR but 240-pin, 64-bit DIMM. Faster than DDR.
Single Ranked DDR Uses one DDR module in a single slot.
Double Ranked DDR Uses two DDR modules in two slots to double bandwidth to the system bus.
Form Factor Description
DIMM (Dual Inline Memory Module) 1689, 184, or 240-pins. Pins on both sides are independent. SDRAM uses DIMM. 64-bits.
SoDIMM (Small outline DIMM) Used in notebook computers. 72-pin is 32- bits and 144-pins is 64-bits
MicroDIMM Smaller than a SoDIMM, used in sub-notebook computers. 144-oins SDRAM and 172-pin DDR
RIMM (Rambus Inline Memory Module) 184 or 168-pin, 16 or 32bit, 800-1600 MHz, 2 notches. Each RIMM slot must be filled. C-RIMM can empty slots. Uses heat spreader. Current DDR and DDR2 is faster and less expensive.
